MK Diamond

MK Diamond offers a complete line of continuous and notched rim diamond blades, bits and polishing tools to meet the needs of both the lapidary professional and hobbyist alike.

A world leader in manufacturing diamond blades and tools for cutting ceramics, masonry, stone, tile, concrete and asphalt MK's products are known for their superior quality and performance.

Blade diameters may be smaller than listed to accommodate blade guards

Conditions

  • Blade diameters may be smaller than listed to accommodate blade guards
  • Shipments in the continental US only.
  • No shipments to California
  • No additional freight charges

Lapidary Blades

MK-301 Gemking™

MK-301 Gemking lapidary blades have been redesigned with a greater diamond concentration and a higher carbon content steel core for improved tension memory. The solid diamond sintered kerf provides better cutting performance and improved coolant flow. The MK-301 provides superior cutting performance for hard materials such as agate, petrified wood or jade.
Rim Height 5mm

  • 6" (152mm) .025" 5/8" 166066
  • 8" (203mm) .040" 5/8" 166067
  • 10" (254mm) .040" 5/8" 166068
  • 12" (305mm) .065" 1" 166069
  • 14" (356mm) .065" 1" 166070
  • 14" (356mm) .080" 1" 168536
  • 16" (406mm) .085" 1" 166071
  • 18" (457mm) .085" 1" 166072
  • 20" (508mm) .085" 1" 166073

BD-301 lapidary blades require a petroleum based or synthetic cutting oil as a cutting fluid/coolant. Water is not suitable to use with these blades and will result in damage to the blade's cutting capacity and will void the warranty. The blades should not be used dry under any circumstances.

MK-297 Criterion™
Diamond lapidary blades for cutting stone. MK-297 blades must be used with oil based coolant.
20" (508mm) .075" 1" 109165
MK-303

The MK-303 Professional grade diamond blade has been designed for cutting rare and valuable materials when waste needs to be held to a minimum and speed of cut is essential. The MK-303 produces smoother cuts, lasts longer and cuts faster than notched rim or plated diamond blades. Designed for use with a water soluble coolant. Blades 16" and larger have segmented rims.
Go to page
Rim Height 5mm

Continous Rim Blades
  • 4" (102mm) .014" 1/2" 153742
  • 4" (102mm) .014" 5/8" 153743
  • 4" (102mm) .020" 1/2" 153629
  • 4" (102mm) .020" 5/8" 153689
  • 5" (127mm) .020" 1/2" 153739
  • 5" (127mm) .020" 5/8" 153740
  • 6" (152mm) .014" 1/2" 153744
  • 6" (152mm) .014" 5/8" 153745
  • 6" (152mm) .020" 1/2" 153691
  • 6" (152mm) .020" 5/8" 153692
  • 6" (152mm) .032" 1/2" 153630
  • 6" (152mm) .032" 5/8" 153690
  • 6" (152mm) .040" 5/8" 156659
  • 6" (152mm) .060" 5/8" 157179
  • 7" (178mm) .030" 1" 169744
  • 7" (178mm) .050" 5/8" 156722
  • 8" (203mm) .025" 5/8" 153693
  • 8" (203mm) .025" 1" 153741
  • 8" (203mm) .032" 5/8" 153694
  • 8" (203mm) .060" 5/8" 156723
  • 9" (229mm) .060" 5/8" 156724
  • 10" (254mm) .032" 5/8" 153695
  • 10" (254mm) .040" 5/8" 153696
  • 10" (254mm) .050" 5/8" 156725
  • 10" (254mm) .060" 5/8" 157180
  • 12" (305mm) .065" 1" 156726
  • 14" (356mm) .070" 1" 156727
Segmented Rim Blades
  • 16" (406mm) .085" 1" 156728
  • 18" (457mm) .085" 1" 156729
  • 20" (508mm) .100" 1" 156730
  • 24" (610mm) .100" 1" 156731
  • 30" (762mm) .125" 1" 156732
  • 36" (914mm) .200" 1" 157046
MK-1000 Saber™

Ultra-thin and made of stainless steel, the Saber blade conserves gem materials and holds waste to a minimum. This makes it an ideal choice for such precious materials as sapphire, jade, ruby and opal. The Saber blade cuts at twice the speed of ordinary lapidary blades. The Ultra thin rim cuts with little chipping and leaves a remarkably smooth surface requiring less polishing time.
Rim Height 3.5mm

  • 6" (152mm) .025" 1/2" 156874
MK-62Q Quartz Blades

Wet cutting segmented rim blades for quartz, volcanic rock and marble.
Segment Height 10mm

  • 10" (254mm) .095" 1" 170764
  • 12" (305mm) .110" 1" 168557
  • 14" (356mm) .095" 1" 166293
  • 16" (406mm) .125" 1" 168599
  • 20" (508mm) .135" 1" 166325