Combicut 350 iPower
Combicut 350 iPower
Combicut 350 iPower
Combicut 350 iPower
Combicut 350 iPower Miter Cutting Tilting Head
Miter Cutting Tilting Head
Spring Loaded Folding Stand
Spring Loaded Folding Stand
Combicut 350 iPower Portable
Wheel Kit Portable
Sound Absorbing Blade Guard
Sound Absorbing Blade Guard
Travel Bar
Accurate Roller System

Combicut 350 iPower

14" 220V 4HP w/ 48" Lenght of Cut, 45 degree Lazer Guide Stone Paver Saw


1188931 Combicut 350 iPower** 14” Stone/Paver Saw 220v 4hp w/ 48” length of cut - 45º, Laser Guide!

Add to Cart

Prices based on delivery to a commercial address or terminal pickup in the continental US only.


Combicut 350

This is The Best Tile, Stone & Masonry Saw in the World!

The all new 350/1200 iPower is more powerful and accurate than ever before. The new 4 h.p. motor combined with the laser guide ensures that cuts are made quickly and accurately. Tile and stone installers, masons, precast fabricators, landscapers and general contractors across America are putting the 350/1200 iPower to the test. Cut 24”x24” pavers on a diagonal, 48” pieces of marble and granite up to 4 ¾” in depth. This saw is versatile and reliable.

The Details

  • Manufacturer: Imer
  • Brand: Imer USA
  • Manufacturer Part Number: 1188931
  • Model: Combicut 350 iPower
  • Blade diameter 14"
  • Blade shaft diameter 1"
  • Max. cutting length - includes the plunge 48"
  • Max. cutting depth 90/45 degrees 4 ¾" / 2 1/3"
  • Motor rating 4 h.p./220v/15amp
  • Motor speed 2,800
  • Cutting table dimensions 55" x 27.5"
  • Weight (crated) 265 lbs. (300 lbs.)
  • Water pan capacity 10 gals.
  • Noise level 75 db(A)
  • OPERATING DIMENSIONS (boxed) Length 69" (70”) Height 55.5" (60.5") Width 30" (30.5")


  • Innovation The blade guard is lined with sound absorbing material used in the boat building industry, the noise while cutting is greatly reduced. The blade guard is removed by two thumb screws, changing blades is fast and easy.
  • Precision With 48 inches of cutting length, and accuracy to 1/32", the COMBI 350/1200 delivers the performance required by the most demanding installations. GUARANTEED !
  • Reliability The water pan is made with ABS plastic, it is very crack resistant.
  • Flexibility The cutting head may be moved up and down for perfect plunge cuts. The cutting head may also be locked in place at any height.
  • Quality The stainless steel cutting surface and jig welded frame are tough, 24" x 24" pavers, bring ‘em on! 4" thick precast pieces, no problem! Cutting marble and granite to be set with virtually no grout line, consider it done!
  • Standard The stainless steel protractor is the only truly accurate rip guide available in the industry.
  • Portability The new stand folds out or folds up with a spring loaded assist. Your stand is always sturdy and ready to go! Each Combi 350 iPower includes a wheelkit, moving around the jobsite is quick and easy.
  • Power The motor is now a high torque 4 h.p 220v single phase stone and paver eating beast. All this power goes from the motor to the blade via a high tech serpentine belt, no adjustment or maintenance required, it is a tough and reliable design. We would like to build a 350/1200 version that runs on 110v, however, our testing has shown that a 110v motor does not hold up when asked to make cuts that are 4 feet in length. It is the equivalent to putting a family car motor into a school bus, it will run for a while, then it’s gonna blow! For those jobsites without 220v current available we recommend around a 7.5 kw generator. It’s a fact, we can go to the moon, but we cannot deliver good power and water to the average jobsite.
  • Accuracy The travel bar is made of extruded aluminum which has been specifically contoured for our nylon roller bearing system. This new roller system requires less maintenance, and when after lots of cutting should replacement be needed it is much easier and faster than ever before.
  • Versatility To make a miter cut just tilt the cutting head over to 45°. The cuts are absolutely perfect, make seamless back splash in just minutes.