Combicut 250/1500 VA Lite
Porcelain Plank Saw
The Combicut 250/1500 VA Lite is designed to cut today’s porcelain plank tiles. Precision cast aluminum components combined with very careful assembly makes for a saw which is accurate, light and extremely reliable. The 250/1500 VA Lite is designed for those jobs that are smaller in nature, and the materials being cut are not that thick. For thicker materials and larger scale commercial jobs IMER USA recommends you upgrade to the Combicut 350/1200 iPower.
It should do real well with the longer, thinner tiles that are manmade, like 3/8” porcelain planks. As it runs on 110v and a standard outlet can only supply 1 ¾ hp it should not be used for thick stone, granite, or marble. There is not enough energy supplied by 110v and 1 ¾ hp to keep the motor alive. Using it as a shop saw is not right either, unless it is just for a few cuts a day. If you have a big job or are cutting thick material get the 350/1200, and live with the 220v requirement. Should someone smoke a 250/1500 from running it all day on a commercial job it is not a warranty issue, as the saw was being used for something which it was not intended.